Atari STF/STE IDE interface sells ;-) few pieces still available.

Discussion:

(too old to reply)

Bertrand C

2016-05-04 08:10:26 UTC

Hi everybody.
I just finished a few IDE interfaces based on Ppera conception/design.
STF and STE versions.

STF version needs a few soldring skills, because you'll have to solder a DIL64 socket above the processor.

STE version is solder free.

I sell these interfaces 30 EURO each (including interface, cable and floppy disk with free driver versions)
For the shipping cost (with tracking) : 2,50 EURO to France. 5.50 EURO to Europe, 7 EURO worldwide.

10 pièces of each cartegory are still remaining at this time.

contact me at ***@gmail.com for any questions or pictures.

Thank you ;-)

Arachide

2016-05-04 08:55:15 UTC

Permalink

Post by Bertrand C
Hi everybody.
I just finished a few IDE interfaces based on Ppera conception/design.
STF and STE versions.
STF version needs a few soldring skills, because you'll have to solder a DIL64 socket above the processor.
STE version is solder free.
I sell these interfaces 30 EURO each (including interface, cable and floppy disk with free driver versions)
For the shipping cost (with tracking) : 2,50 EURO to France. 5.50 EURO to Europe, 7 EURO worldwide.
10 pièces of each cartegory are still remaining at this time.
Thank you ;-)

Hello,

what can be connected to the DIE interface? Both HD and CD ROMs ?

Guillaume.

Bertrand C

2016-05-08 09:15:31 UTC

Permalink

Hi,
well i never tried CD-ROM but it seems to work. I have to try it ;-)
HD works well, since it is a 3"1/2 version, you'll have to use an adaptater if you want to connect a 2"1/2 hard drive. But it has been tested and works very well ;-)