Discussion:
Serial link
(too old to reply)
Guillaume Tello
2011-03-15 09:11:17 UTC
Permalink
Hi,

What program can perform a serial link between TT and MegaSTE using the
115200 baud rate?

I wasn't able to achieve this with ST Trans, even with the CPX
configuring the default port.

I don't need a network program, just a link to transfert files.

Guillaume;
STranio STranio
2011-03-15 09:40:03 UTC
Permalink
Post by Guillaume Tello
Hi,
What program can perform a serial link between TT and MegaSTE using the
115200 baud rate?
I wasn't able to achieve this with ST Trans, even with the CPX
configuring the default port.
I don't need a network program, just a link to transfert files.
Guillaume;
Hi Guillaume

You can try with ParCoPy; MegaSTe <--> TT, over 65Kb/s.
Guillaume Tello
2011-03-15 11:22:51 UTC
Permalink
Post by STranio STranio
Post by Guillaume Tello
Hi,
What program can perform a serial link between TT and MegaSTE using the
115200 baud rate?
I wasn't able to achieve this with ST Trans, even with the CPX
configuring the default port.
I don't need a network program, just a link to transfert files.
Guillaume;
Hi Guillaume
You can try with ParCoPy; MegaSTe<--> TT, over 65Kb/s.
It is with a special parallel cable, isn't it?
The problem is that the computers are far from each other (i am using a
15meters serial cable!).

Guillaume.
PeP
2011-03-16 13:09:13 UTC
Permalink
        The problem is that the computers are far from each other (i am using a
15meters serial cable!).
        Guillaume.
In such case, you'd better use the LAN-port, since the signal
integrity is much better for balanced transmissions.

Connect or other terminal programs can achieve what you're talking
about?
wongck
2011-04-08 01:06:57 UTC
Permalink
Post by Guillaume Tello
What program can perform a serial link between TT and MegaSTE using the
115200 baud rate?
Did you have HSMODA07 installed?
This allows 115Kbps easily.
I have this between my Falc & PC.
So your TT/MSTE should be no issue as they are 16MHz or faster.
Some details here -> http://phsw.110mb.com/nw-nullmodem.html
Guillaume Tello
2011-04-08 06:20:14 UTC
Permalink
Post by wongck
Post by Guillaume Tello
What program can perform a serial link between TT and MegaSTE using the
115200 baud rate?
Did you have HSMODA07 installed?
This allows 115Kbps easily.
I have this between my Falc& PC.
So your TT/MSTE should be no issue as they are 16MHz or faster.
Some details here -> http://phsw.110mb.com/nw-nullmodem.html
Okay!
I will try HSModem,

Guillaume;

Loading...