Hatari 2.3

[Francois LE COAT]

Hi,

Hatari 2.3.0 the ATARI emulator was released a few days ago...

<https://download.tuxfamily.org/hatari/2.3.0/>

I made a video demonstration with a Falcon030 at 32MHz / TOS4.04:

It's the replay of the GEM sequence "EUREKA.REC" with my software,
with the "RECORD.ACC" accessory. The issue is I used TOS4.04, but
I wanted to use EmuTOS 1.0 instead, because I know EmuTOS works with
appl_tplay() and appl_trecord() system calls. But when I switched
Hatari to boot on EmuTOS 1.0, the FPU (68882) was disabled...

<Loading Image...>

So, when I start my Eureka 2.12 software, that makes usage of the FPU,
there's a floating point error (LineF).

Is it a known issue ? Why is the FPU disabled when booting EmuTOS ?

Thanks by advance for any help =)

Best regards,

[Francois LE COAT]

Hi,

Post by Francois LE COAT
Hatari 2.3.0 the ATARI emulator was released a few days ago...
    <https://download.tuxfamily.org/hatari/2.3.0/>
http://youtu.be/SLm5ayChv9Q
It's the replay of the GEM sequence "EUREKA.REC" with my software,
with the "RECORD.ACC" accessory. The issue is I used TOS4.04, but
I wanted to use EmuTOS 1.0 instead, because I know EmuTOS works with
appl_tplay() and appl_trecord() system calls. But when I switched
Hatari to boot on EmuTOS 1.0, the FPU (68882) was disabled...
    <http://eureka.atari.org/Hatari230.png>
So, when I start my Eureka 2.12 software, that makes usage of the FPU,
there's a floating point error (LineF).
Is it a known issue ? Why is the FPU disabled when booting EmuTOS ?

The issue was corrected with Hatari v.2.3.1 booting EmuTOS 1.0.0...

<Loading Image...>

Eureka 2.12 software can be used with EmuTOS and Hatari that is here:

<https://download.tuxfamily.org/hatari/2.3.1/>

Thanks to the Hatari development Team :-)

Regards,